Impact of airborne particulate matter on skin: a systematic review from epidemiology to in vitro studies

Background Air pollution is killing close to 5 million people a year, and harming billions more. Air pollution levels remain extremely high in many parts of the world, and air pollution-associated premature deaths have been reported for urbanized areas, particularly linked to the presence of airborne nano-sized and ultrafine particles. Main text To date, most of the research studies did focus on the adverse effects of air pollution on the human cardiovascular and respiratory systems. Although the skin is in direct contact with air pollutants, their damaging effects on the skin are still under investigation. Epidemiological data suggested a correlation between exposure to air pollutants and aggravation of symptoms of chronic immunological skin diseases. In this study, a systematic literature review was conducted to understand the current knowledge on the effects of airborne particulate matter on human skin. It aims at providing a deeper understanding of the interactions between air pollutants and skin to further assess their potential risks for human health. Conclusion Particulate matter was shown to induce a skin barrier dysfunction and provoke the formation of reactive oxygen species through direct and indirect mechanisms, leading to oxidative stress and induced activation of the inflammatory cascade in human skin. Moreover, a positive correlation was reported between extrinsic aging and atopic eczema relative risk with increasing particulate matter exposure.


Introduction
Over 91% of the world's population lives in areas of poor air quality with air pollutant concentrations exceeding the World Health Organization reference limits [1]. The State of Global Air 2019 report published by the Health Effects Institute (HEI) indicated that air pollution (Particulate Matter 2.5 (PM 2.5 ), ozone, and household air pollution) is the fifth leading risk factor for mortality worldwide and in 2017, air pollution is estimated to have contributed to close to 5 million deaths globally [2].
Air pollutants can be grouped into gaseous pollutants (e.g., sulfur dioxide, nitrogen oxides, carbon monoxide, ozone, and volatile organic compounds), persistent organic pollutants (e.g., dioxins), heavy metals (e.g., cadmium, lead, mercury), and particulate matter (PM). Among many sources, the primary source of PM is due to anthropogenic activities, arising from the combustion of fossil fuels used for transport and the generation of energy [3]. Traffic is one of the most significant contributors to urban PM [4], resulting in a ubiquitous air distribution. PM is a complex mixture, and the concentration, particle size, and chemical properties of PM vary widely in space and time. PM consists of primary particles, which are emitted directly to the atmosphere as a result of incomplete combustion processes or are produced by the abrasion of tires, of brakes, road surfaces, and the generation of fugitive dust. Additionally, PM contains secondary particles, which are chemically formed in the atmosphere from gaseous precursors [5]. Because of their fissured structure, these particles offer an ideal surface for the attachment of other (toxic) substances. According to the US Environmental and Protection Agency (EPA), PM can be classified according to particle size (diameter) as follows, PM 0.1 (ultrafine particles, ≤ 0.1 μm), PM 2.5 (fine particles, ≤ 2.5 μm), PM 10 (coarse particles, ≤ 10 μm) [6].
The PM 10 fraction consists primarily of crustal materials, sea salt, biological factors, including bacteria and fragments of pollen, and are generated by mechanical processes rather than combustion. On the other hand, PM 2.5 and PM 0.1 are predominantly produced by combustion processes and consist primarily of metals, hydrocarbons, and secondary particles formed by chemical reactions with gaseous compounds in the atmosphere [7,8]. The majority of the particle mass is in a fraction of less than 2.5 μm, with the largest number of particles in the fraction in less than 0.1 μm. PM 0.1 with the greater surface area can carry a large amount of adsorbed pollutants, oxygen gases, organic compounds, and transition metals [9]. An example of hydrocarbons that are frequently adsorbed on the PM's surface is polycyclic aromatic hydrocarbons (PAHs) [10]. PAHs are considered to cause one of the most relevant health hazards due to their ability to induce the formation of reactive oxygen species (ROS) [11], as mediators of cardiovascular effects [12] and increases the risks of cancer in humans [13].
Long-term effects of air pollution on the pulmonary and cardiovascular system have been extensively studied, and include a strong correlation between different levels of air pollution and mortality, exacerbation of asthma, chronic bronchitis, respiratory tract infections, ischemic heart disease and stroke [14]. Although most of the attention of airborne PM has focused on the impact on human respiratory and cardiovascular systems [15,16], many other primary and secondary organs (e.g., skin, gut, liver, kidney) are affected upon repetitive exposure to PM [17]. Indeed, because of its peculiar location, human skin acts as a biological shield against air pollutants, and prolonged and repetitive exposure to high levels of airborne PM has been shown to have profound adverse effects on cutaneous tissue [18][19][20][21].
This review highlights the current understanding of the impact of airborne PM on the skin and the underlying physiological mechanisms that are affected. Furthermore, it provides an in-depth overview of in vivo and in vitro studies of airborne PM exposure to skin and lists the biomarkers of interest and findings. The following search engines and databases, PubMed, ScienceDirect, Google Scholar, and Web of Science, were used to identify peer-reviewed research articles and reviews on the effects of airborne PM on skin. From among 540 articles identified, 75 articles were included for further consideration after manual screening of the articles. The articles that were excluded either did not contain data or were classified as editorials or conference abstracts. Finally, articles in languages other than English or German were also omitted.

The structure and function of human skin
Mammalian skin is the largest organ in the human body and can be divided into two major layers, the epidermis and the dermis (Fig. 1). The dermis, the lower layer of the skin, is made of connective tissue and has a thickness of up to 3 mm. Fibroblasts are the primary cell type in this layer [23,24]. These cells secrete collagen and elastin, which contribute to the generation of the extracellular matrix, providing the dermis with strain resistance and elasticity, respectively [23,25,26]. Embedded within the dermis are structures such as nerve endings, sebaceous glands, hair follicles, and blood and lymphatic vessels [24]. The vascular network provides nutrients and oxygen to the upper skin layers and their surrounding tissues. Additionally, the vascular network takes part in detoxification, regulation of temperature, and wound repair. Besides fibroblasts, there are various other cell types found in the dermis: endothelial cells, mast cells, macrophages, dendritic cells called Langerhans cells, T cells, and neutrophils. Numerous dermal immune cells provide an effective defense mechanism against the invasion of pathogens and exogenous substances [27,28].
The layer above the dermis, the epidermis, is divided into four to five layers and contains mainly keratinocytes [29]. The lower layer, the stratum basale (SB), is made of a single layer of undifferentiated keratinocytes. These cells are continually dividing and upon differentiation migrating up to the adjacent layer, the stratum spinosum (SS), where they start a maturation process, such as changing their shape from columnar to polygonal. The layer above the SS is the stratum granulosum (SG) that contains differentiated keratinocytes with a typical accumulation of cytoplasmic materials, e.g., keratohyalin granules. They also produce lamellar bodies (LBs) that secrete specific lipid compounds, which are essential for the formation of the uppermost layer of the skin, the stratum corneum (SC) [30,31]. In thick skin, such as on the palms of the hands and soles of the feet, there is an additional thin layer named the stratum lucidum (SL), located between the SG and SC [32]. The SC is a multiple layered tissue (e.g., 15-20 layers), which generally has a thickness of 10-20 μm [33]. This layer consists of corneocytes that are terminally differentiated keratinocytes lacking both nucleus and cytoplasmic organelles [33][34][35], surrounded by a lipid matrix providing a permeability barrier. The described differentiation process is marked by the expression of early (e.g., cytokeratin 5 and 14) and late (e.g., cytokeratin 1 and 10) differentiation markers [36]. Other cells found in the epidermis are melanocytes, dendritic cells (i.e., Langerhans cells), T cells (e.g., CD8+ cells), and Merkel cells [29].

Epidemiology
Exposure to airborne PM is associated with several skin diseases and disorders and has been extensively reviewed elsewhere [20,21,[37][38][39].
In healthy skin, exposure to urban PM has been associated with accelerated extrinsic aging [40][41][42], its clinical symptoms being pigment spot formation, coarse wrinkle development, and elastosis [43]. Further evidence from epidemiological, clinical studies, and in vitro studies, and aging mechanisms have been reviewed [19,[44][45][46], all indicating the generation of free radicals, the activation of aryl hydrocarbon receptor signaling, the induction of inflammatory cascade, and finally the impairment of the skin barrier.
In Germany, a higher incidence of skin melanoma among women was reported for women living in rural areas compared to women living in non-rural areas [47]. In another semi-individual cohort study, an increase in PM 10 resulted in a 52% increase in the relative risk of non-melanoma skin cancer [48]. The genotoxic potential of PM was further investigated in an in vitro study that showed (i) a positive dose-response relationship for PMinduced DNA reactivity, and (ii) the highest DNA reactivity for PM 2.5 [7].
The chronic relapsing inflammatory skin disease, atopic eczema (AE), is characterized by skin barrier defects, intense pruritus, and immunological dysregulation [49][50][51]. This disease is not only caused by genetic predisposition (i.e., filaggrin mutation) and a dysregulated immune system but also triggered by several environmental factors, including air pollution, as suggested by recent epidemiological reports [20,52]. A meta-analysis on skin diseases due to PM exposure included 13 studies and showed correlations between PM 10 and PM 2.5 -exposure and several skin diseases [53]. It reported on a significant association between PM 2.5 -exposure of younger people (e.g., 2-30 years), which was not the case for PM 10 exposure. However, with an odds ratio of 1.05 and the small quantity of observational, cohort studies, and individual studies, the statistical power of this meta-analysis is limited. Several new studies have been published that were not included in this meta-analysis [54][55][56][57][58][59][60]. More recently, Krämer and co-workers have reviewed this evidence by combining data from 57 environmental epidemiological studies in a systematic review [61]. No sufficient evidence for a higher AE incidence upon large-scale exposure assessments of air pollution (PM 10 and sulfur dioxide (SO 2 )) was reported.
Contrary to the small-scale exposure assessments (PM 2.5 ), where in most of the studies (23 out of 30), a significant association between AE and traffic-related emissions was The epidermal layer consists, from top to bottom, of the stratum corneum (SC), the stratum lucidum (SL), the stratum granulosum (SG), the stratum spinosum (SS), and the stratum basale (SB). Figure adopted with permission from van Smeden et al. [22] determined. Additionally, in all of the panel studies, there was a strong correlation between the AE symptom severity and outdoor pollution. Interestingly, an association between maternal exposure to traffic-related pollution and AE incidence in the offspring was found. From the prospective birth cohort study, Cohort for Childhood Origin of Asthma and Allergic Diseases (COCOA) [62], 468 oneyear-olds were included with measurements of outdoor PM 10 and PM 2.5 and transepidermal water loss (TEWL), which is a measure for skin barrier dysfunction [63]. The effects of prenatal PM exposures were studied during three trimesters on skin barrier dysfunction and AE [64]. A positive correlation was found between prenatal PM exposure during the first trimester and the skin barrier dysfunction and AE in the offspring: early-onset AE and higher AE severity at age three. It is suggested that PMinduced oxidative stress could induce epigenetic changes in fundamental DNA repair genes in the placenta, which could affect fetal immune development. Pulmonary and intranasal exposure to PM 10 , PM 2.5 , and PM 0.1 have been extensively studied for their ability to enhance Th2-related immune responses, their role as an immune adjuvant, and their effects on the development of atopic disease [65][66][67].
Dong and co-workers reviewed reports on PM exposure and skin inflammation in China and concluded that, indeed, PM emissions aggravate the symptoms of inflammatory skin diseases like AE [68]. The aforementioned results have been supported by a recent review on the impact of different air pollutants on AE, which included a total of 21 in vitro studies, animal studies, clinical trials, and case studies [69].
The exact mechanisms through which PM can aggravate AE symptoms are yet to be further investigated. Additionally, determining the synergistic effects of different air pollutants while taking solar radiation into account can be challenging and is often not addressed when studying the effect of a single pollutant on the skin [70]. In a study from Japan, biopsies from 75 AE patients were investigated and a correlation was found between several oxidative stress markers in the SC and the severity of the disease [71]. It is hypothesized that environmentally generated reactive oxygen species can induce oxidative damage to proteins in the SC. Eventually, this may lead to the disruption of the skin barrier and further exacerbation of AE. Additionally, the aryl hydrocarbon receptor may play a key role in PM-induced AE aggravation. It is suggested that PM and AE are linked by the activation of the aryl hydrocarbon receptor signaling pathway and transactivation of neurotrophic factor artemin, by ligand species that are adsorbed onto airborne PM [72,73].
Thus far, the studies mostly investigated the link between AE and PM. However, it is hypothesized that patients with other inflammatory skin diseases with an impaired barrier function, such as the rare genetic skin disease Netherton syndrome [74] and psoriasis [75], are more prone to the effects of PM.

Simulating biological responses of the skin to airborne PM in vivo and in vitro
The effects of airborne PM on the skin and underlying mechanisms will be critically evaluated, i.e., by reviewing studies on exposure of in vitro human two-dimensional (2D) and three-dimensional (3D) models, and finally in vivo animal models. The studies used either standard reference materials or in-house diesel emission and urban particulate matter extracts as exposure constituents.

Airborne PM for experimental studies
As aforementioned, the composition of PM is complex and includes metals, organic compounds (e.g., organic carbon and materials of biological origin), inorganic carbonaceous material, sulfate, and nitrate, among others. To assess their health effects, different approaches have been applied, such as epidemiological studies, controlled exposure studies to a defined source, or collection of particles on filters which can then be used for further experiments. It is important to add that the thorough characterization of the particles, including particle size and chemical analysis of the adsorbed chemicals onto the particles to correlate observed effects, is challenging but highly relevant [5].
The most common particles used in in vitro and in vivo studies to simulate the effects of airborne PM on the skin are Standard Reference Materials® available from the National Institute of Standards and Technology (NIST) [76]. NIST offers three different diesel PM extracts: SRM® 1650b, SRM® 1975, and SRM® 2975. Both SRM® 1975 and SRM® 2975 contain diesel PM collected from a filtering system of a diesel-powered forklift engine. SRM® 1650b contains material that is obtained from the heat exchangers of a dilution tube connected to diesel engines. This standard reference material is considered representative of particulate emissions of heavy-duty diesel engines and can be categorized as PM 2.5 . Besides using certified standards, diesel particulate extracts from several different diesel engine emissions collected on filters have been extracted and tested on skin models. Additionally, NIST offers two airborne PM standards named SRM® 1649b and SRM® 1648a that have been collected in the Washington, DC area and the St. Louis, MO area, respectively, between 1976 and 1977. Other standards for fine atmospheric PM are SRM® 2787 (i.e., PM 10 ) and SRM® 2786 (i.e., PM ≤ 4 μm) collected in Prague, the Czech Republic in 2005.
The Joint Research Centre (JRC) of the European Commission produces European Reference Materials (ERM) that are used to simulate airborne PM [77]. JRC is accredited to ISO 17034, ensuring the appropriate quality of ERMs. They offer ERM-CZ100 and ERM-CZ120 fine urban dust particles that are processed in a way that resembles PM 10 -like urban dust without (e.g., ERM-CZ120) or with PAHs (ERM-CZ100). The National Institute for Environmental Studies (NIES) in Japan offers PM 10 -like urban dust certified reference material (CRM) no. 28 that have been collected from a central ventilating system in a building in Beijing, China [78].
Several studies reported self-collection of airborne PM or PM from seasonal dust storms in Asia and West Africa, e.g., on building rooftops in Asia, using an in-house filtering system, yielding PM 2.5 . Others reported usage of concentrated ambient air particles (CAPs), which are airborne particles that are concentrated to PM 2.5 for skin model exposure.
Skin models used to study airborne PM effects Animal models The main in vivo approaches to study skin responses to either drug permeation or toxicological outcome are either rodents (i.e., rats or mice) or pigs [79]. Rodent skin differs significantly from human skin, due to considerably thinner skin layers and a higher hair follicle density, leading to higher substance permeation [80]. On the contrary, porcine skin more closely resembles the structural properties of the human skin [81][82][83][84]; however the animals are more challenging to handle and have higher fat storage [85].
Animal models are employed to compare PM effects on skin with a healthy and compromised barrier function. A disrupted barrier can be created by the conventional tape stripping method, which consists essentially of removing the SC of the animal skin model layer by layer [86][87][88][89][90][91][92]. Another approach is to use the NC/Nga mouse model that develops skin lesions that are comparable to human AE lesions [93][94][95][96].
Animal models have various disadvantages, besides their different physiological structures. Animal studies are highly time and cost-ineffective; they are restricted to many regulations and countless ethical concerns [97]. To effectively comply with and implement the three R's (i.e., reduction, refinement, and replacement) [98] for the laboratory use of animals, alternatives to animal testing like 2D and 3D in vitro human skin models should be considered to comply with the reduction and replacement concept [99].

In vitro human 2D models
Human adult low calcium high temperature (HaCaT) cells are an immortalized keratinocyte cell line that is frequently used for 2D in vitro studies [100]. However, a significant limitation of this cell line is their limited response to major T helper cell cytokines [101]. It was shown that HaCaT cells respond differently to these pro-inflammatory cytokines compared to primary cells, resulting in different expression profiles of genes related to the development of the skin barrier [102]. Therefore, a model using HaCaT cells that focuses on the pathophysiological response towards pro-inflammatory cytokines should necessitate careful interpretation. The cells that are considered more biologically relevant are primary cells, which are explanted directly from healthy donors. The primary skin cells that are most often studied concerning the effects of PM are normal human epidermal keratinocytes (NHEK) or normal human dermal fibroblasts (NHDF) monocultures. Human primary cells are either isolated from the neonatal foreskin or adult skin. In a study that investigated the proteome in primary keratinocytes with respect to gender and age, it was determined that there were only minor differences [103]. Primary skin cells are cultured on specific substrates in an optimized cell culture medium and receive PM treatment directly in their culture medium, referred to as systemic treatment. Although the use of 2D models allows for easy, fast, and low-cost experiments, they lack a physiological skin barrier with a competent SC layer. Without this protective layer, the viable cells are in immediate contact with the tested substance. Therefore, systemic treatment of a 2D model consisting of living cells could result in an overestimation of the impact of the testing material and not resemble the real-life exposure situation. It was found that the keratinocytes cultured in 3D, even upon a systemic treatment, are more resistant to cytotoxic agents such as hydrogen peroxide compared to keratinocytes cultured in 2D [104]. A recent study compared the effect of silver nanoparticles on oxidative stress and inflammation in 2D and 3D skin models [105]. Cell viability was reduced, and the silver content was approximately 9-fold higher in 2D keratinocytes compared to a 3D model. Additionally, the oxidative stress and pro-inflammatory response were substantially stronger in a 2D model compared to a 3D model. For this reason, the use of a 3D skin model to better simulate the real-life topical exposure condition and assessment of the skin's barrier function upon the treatment is recommended.

In vitro human 3D models
The two main types of 3D models used to mimic human skin are human epidermal equivalents (HEE) and human skin equivalents (HSE) [106,107].
Cultivation of HEE models starts with one cell type: either primary keratinocytes isolated from the human epidermis, or immortalized cell lines (e.g., N/TERT). These keratinocytes are grown in typical culture inserts on a supporting substrate, such as an inert membrane with a defined pore size or collagen matrix, using the air-liquid culture technique. This technique includes removing the cell culture medium from the upper side to expose the cells to air on one side, allowing the cells to 'feed' from the medium in the chamber underneath [108][109][110]. Upon stimulation with growth factors, insulin, ascorbic acid, and calcium, these keratinocytes can terminally differentiate into corneocytes, forming the upper layers of the epidermis over a time span of one to two weeks.
HSE models are comprised of both a dermal and an epidermal compartment consisting of fibroblasts embedded in a collagen matrix and keratinocytes, respectively. This two-compartmental model creates an interplay between the two skin layers, resulting in a better resemblance to human skin.
Although 3D skin models like the HSE and HEE are practical models that well-resemble the human skin, their barrier properties are less defined, due to a different SC lipid composition and a higher barrier permeability compared to that of native human skin [80,[111][112][113][114][115]. In 3D models exposed to the air-liquid interface, PM can be applied either directly in the culture medium (systemic treatment) or on the topical side of the skin model either as aerosol or suspension (topical treatment). Topical treatment is considered more physiologically relevant compared to real-life exposures as opposed to systemic treatment.

PM-induced skin barrier dysfunction and particle penetration
There are four different barrier compartments in the epidermis: physical, microbial, chemical, and immunological compartments [106]. In this section, the effects of PM on the physical, microbial, and chemical barrier compartments will be reviewed.

Microbial barrier
The microbial barrier compartment consists of a diverse range of microorganisms, called the commensal skin microbiome that colonizes the skin. This includes colonization by millions of bacteria, fungi, and viruses, and the composition varies depending on the location of the skin [116]. These commensals protect the skin by preventing infection by pathogenic microbes. Although the research field of the skin's microbiome has been given rise to many investigations over the last years [116,117], studies on PM and the skin's microbiome are scarce. It was shown that the composition of children's skin microbiome was dependent on their age and living environment (e.g., rural versus urban), indicating a possible link between PM exposure and the skin microbiome composition [118]. Nevertheless, the role of the microbial barrier in PM-induced damages remains yet to be unraveled.

Physical barrier
Reported findings on the effects of PM on the skin's barrier function in vivo and in vitro are summarized ( Table 1).
The physical barrier compartment of the skin can be seen as a so-called "outside-in" and "inside-out" barrier. The "outside-in" barrier consists of the SC, which protects against the penetration of pathogens, allergens, and other exogenous substances such as PM [146,147]. Several distinct proteins in the epidermis are crucial to the terminal differentiation program and the barrier function of the skin, such as involucrin, loricrin, and profilaggrin [148,149]. Keratin filaments in the SG keratinocytes interact with profilaggrin, leading to aggregation of these filaments. Additionally, the intracellular components are degraded, and the desmosomes are transformed into corneodesmosomes, linking the corneocytes together that results in a densely packed layer [150]. The cornified envelope is formed around the plasma membrane and composed of structural proteins like involucrin and loricrin that are cross-linked by calcium-dependent transglutaminases [147]. Another protein that is crucial to the cornified envelope structure is the members of the small proline-rich (SPRR) family. SPRR3 was shown to be upregulated in keratinocytes treated with PM 2.5 [132]. SPRR3 upregulation has been shown to decrease ciliogenesis in vitro [140], which is responsible for suppressing skin pigmentation in melanocytes [151].
The "inside-out" barrier, mainly provided by tight junctions, prevents excessive TEWL and, therefore, protects the skin against dehydration [146,147,152]. It is likely that PM disrupts the barrier function of the skin, by modulating or even degrading the tight junctions. In other epithelial cells like lung cells or nasal cells, PM is shown to disrupt the barrier by modulating and even degrading tight junction proteins such as occludin, zona occludens-1 (ZO-1), and claudin-1 [153,154]. Also, increased endothelial barrier permeability was shown to be PM-induced, due to ZO-1 degradation [155].
In animal models, PM treatment mainly involved repetitive topical treatment for a longer time period (up to 2 weeks) of a relatively high dose (0.1-8 mg/ m 2 ), resulting in decreased expression of structural barrier protein like keratins and filaggrin [120][121][122]. In porcine skin, deterioration of the skin barrier by PM due to disrupted tight junctions led to increased skin permeability [120]. In mice, penetration of PM was observed in both healthy skin and to a greater extent in the skin with a decreased barrier function (e.g., tape-stripped skin or skin of an AE mice model) [121]. In 2D cultures, e.g., in keratinocytes and fibroblasts, cellular internalization of PM was observed after short-term exposures (i.e., 24 h) [121,123,135,138,145]. It is important to note that engineered nanoparticles (e.g., single particles with a diameter less than 100 nm [156]) have been reported to penetrate the first layers of the epidermis (i.e., SC and SG) and few reports on penetration into deeper layers of the viable epidermis or even dermal layers [157,158]. However, the penetration of PM depending on size and agglomeration into the epidermis in healthy and diseased skin must be evaluated in future studies. In 3D HSE models, a systemic treatment with PM (200 μg/mL) induced alterations in skin morphology and expression levels of structural proteins after a long time exposure (i.e., 48 h up to 6 days) [125,126]. In 3D HEE models, PM usually in concentrations of up to 50 μg/mL was mainly applied topically and short-term exposures (i.e., 24 to 48 h) were performed [128,130,132,133]. PM was shown to affect the physical epidermal barrier in 3D models, as indicated by altered expression of proteins important for epidermal differentiation, such as filaggrin, involucrin, loricrin, and keratins [125,127,129,130,132,133]. Additionally, markers for proliferation, such as Ki67, 5-bromo-2′-deoxyuridine (BrdU) incorporation, and proliferating cell nuclear antigen (PCNA), were shown to be decreased upon PM exposure [125,130]. Reduced expression of differentiation and proliferation markers was also shown in 2D models, i.e., HaCaT and NHEK cells [122,125,127,140,141,143,144].
PM was also reported to affect the skin's cholesterol metabolism and increased cholesterol levels in 2D and  15, S100A7, S100A8, S100A9, and S10012. [132] HaCaT CRM no. 28  3D skin models [134]. Cholesterol is one of the main lipid components of the matrix surrounding the corneocytes in the SC, thereby actively contributing to the permeability barrier on the epidermis. Altered cholesterol metabolism in the skin due to PM exposure could indicate an altered barrier function of the skin.

Chemical barrier
Keratinocytes are crucial to the production of antimicrobial peptides (AMPs), serving as the chemical barrier compartment, preventing microbial invasion at sites of damaged epithelium by directly terminating the pathogen. These molecules can destroy bacteria either by creating holes in their cellular walls or by sequestering iron, a crucial nutrient for bacterial growth [159]. Examples of AMPs are cathelicidin (i.e., LL-37) [160], defensins, and the S100 protein family [161]. The expression of numerous genes that are encoding AMPs is differentially regulated by several pro-inflammatory cytokines [162]. Increased AMP expression was observed in a 3D HEE and primary keratinocytes treated with PM [132,134], indicating an alteration in the chemical epidermal barrier.

PM-induced oxidative stress
One of the primary mechanisms of the adverse effects of PM is through the generation of ROS. ROS are a group of highly reactive chemical species that are derived from the oxygen metabolism characterized by an unpaired electron (e.g., hydroxyl radical and superoxide anion) [163]. When the production of ROS overwhelms the skin's antioxidant defense, tissues incur an oxidative stress condition [164]. ROS can damage lipids, proteins, and DNA, leading to oxidative injury via stress on several cellular organelles, resulting in tissue damage [165]. Reports on PM-induced oxidative stress in the skin have been reviewed and summarized (Table 2). In brief, PM can induce ROS generation via direct and indirect mechanisms, as further discussed in this section.

PM triggers exogenous and endogenous ROS formation
PM can trigger the formation of exogenous ROS levels through the formation of free radicals as a result of the high particle surface reactivity [188,189]. Diesel PM and its organic extract were shown to both possess high reactivity by generating ROS via the catalyzation of oxygen reduction by various reductants [190]. In addition, PAHs and quinones that are bound to the PM's surface have shown strong redox activity in vitro [191]. Transition metals (e.g., copper and iron) present in PM can generate ROS through Fenton reactions [192]. In keratinocytes, redox-active components such as copper and quinones were shown to induce oxidative stress by means of inducing the nuclear translocation of a redox-sensitive protein complex, causing mitochondrial stress and finally leading to apoptosis [193]. The redox activity of PM is correlated to the size and the adsorbed species on the surface [194]. Higher redox activity per PM mass was measured for ultrafine particles, compared to particles of a larger size. Moreover, a strong correlation was found between PM's redox activity and the mass fractions of species they carry (i.e., metals and PAHs). Indirectly, PM or its adsorbed species (e.g., PAHs, quinones, metals) can increase endogenous ROS generation by inducing mitochondrial stress and increasing the activity of ROS producing enzymes. The mitochondria are commonly considered as the main source of ROS production in the cell. PM induces mitochondrial dysfunction, by inducing major structural damage [123,135,195]. Typically, mitochondrial dysfunction is indicated by reduced ATP levels, as determined in PM 2.5 -treated keratinocytes and fibroblasts [175]. This dysfunction leads to the generation of mitochondrial ROS, and to increased radical production and mitochondrial Ca 2+ levels in vitro [123,143,174,175,182]. As a result, the intracellular ROS levels were shown to increase substantially after 30 min of PM-treatment up to 24 h (e.g., 50 μg/mL) in 2D skin models [119, 121-124, 126, 130, 137, 138, 142, 143, 168, 171, 173, 175, 176, 179-186].
The endoplasmic reticulum (ER) is responsible for most of the intracellular Ca 2+, and, as a result, changes in the cellular Ca 2+ -balance activate ER stress [196]. PM was shown to induce ER stress, as measured by increased levels of intracellular Ca 2+ [123,168,175,[184][185][186]. Additionally, the ER stress sensor proteins for unfolded or misfolded proteins, protein kinase-like ER kinase (PERK), inositol-requiring 1 alpha (IRE1α), and activating transcription factor 6 (ATF6) [197], were activated in vitro [123,175]. In vivo, mitochondrial and ER stress was observed after longer (e.g., 7 days) topical PM-exposure, as indicated by mitochondrial and ER swelling [123].
Sensing exogenous chemical substances is paramount to stimulating an immune response as the first line of defense against these compounds. An important sensor of environmental chemicals is the aryl hydrocarbon receptor (AhR), a transcription factor that is highly expressed in all skin cells [198]. Besides the xenobiotic metabolism and preserving the skin's homeostasis, the AhR plays a role in epidermal differentiation and barrier function of the skin [199,200].  [201]. Upon binding to its ligand, the AhR translocates from the cytoplasm to the nucleus, where it forms a dimer with the AhR nuclear translocator (ARNT) [202]. PM   induces the nuclear translocation of AhR in vitro [119,124,171,172,178]. The AhR/ARNT complex binds to conserved promoter regions containing the xenobiotic response element (XRE), promoting the transcription of several groups of target genes, such as from the phase I metabolism (e.g., cytochrome P450 family 1 subfamily A member 1, CYP1A1, CYP1A2, and CYP1B1), the phase II metabolism (e.g., UDP glucuronosyltransferase family 1 member A complex locus, UGT1A and glutathione S-transferase A1, GSTA1) and a gene for the arylhydrocarbon receptor repressor (AhRR) [203]. CYP enzymes can metabolize PAHs, and the formed metabolites can induce cell damage either by the formation of DNA, protein adducts, or the generation of ROS [195,[204][205][206][207][208]. Indeed, PM upregulates the CYP enzyme mRNA and protein expression in vitro and in vivo [119,128,129,134,135,139,141,167,171,172,178,187].
Other ROS producing enzymes are the members of the nicotinamide adenine dinucleotide phosphate (NADPH) oxidase (NOX) family [209]. Once activated by PM [122,169,173,179,181,184], these enzymes generate high levels of ROS.

PM-induced oxidative stress results in lipid, protein, and DNA damage
The skin is covered by a thin layer of sebum, that functions as a barrier against water evaporation (i.e., TEWL) [210]. Sebum lipids, such as squalene, wax, cholesterol (esters), triglycerides, and free fatty acids, are a target for peroxidation by ROS. In addition to oxidation by exogenous ROS, endogenous ROS can target polyunsaturated fatty acids (PUFAs) from cell membranes, leading to the generation of reactive aldehyde byproducts like malondialdehyde (MDA) and 4-hydroxy-2-nonenal (HNE) [211], commonly used as biomarkers for oxidative stress [212,213]. Skin exposure to PM was found to induce lipid peroxidation, as well as elevated levels of reactive aldehyde byproducts [119,123,128,133,145,168,175,177,[182][183][184]. These reactive aldehydes can, in turn, react with amino acid residues in proteins, resulting in the formation of carbonylated proteins [214], which were also detected in the skin upon treatment with PM [123, 168-171, 175, 182-184]. The introduction of carbonyl groups (e.g., aldehydes and ketones) in proteins can also be caused by oxidative cleavage or the direct oxidation of amino acid residues [214]. The formation of these highly stable carbonyl groups results in conformational changes and irreversible damage to the polypeptide chain. Subsequent unfolding and complete inactivation of the protein allows for protein crosslinking, leading to the formation of adducts [215]. Also, DNA can be a target for ROS, and PM was shown to induce the formation of DNA adducts in mice skin [166]. Counteracting PM-induced oxidative stress The first line of defense against ROS is the cornified envelope, especially the SPRR family [216]. It was shown that cysteine residues within the SPRR proteins are responsible for ROS quenching, most likely due to its location on the outer layer of the skin [217]. Additionally, it was shown that common skin bacteria secrete specific proteins to counteract oxidative stress [218].
Other defense mechanisms, to abrogate oxidative stress processes, are identified like the upregulation of antioxidant proteins and detoxifying enzymes that are activated by transcription factors via antioxidant response elements (ARE) [165]. The expression and the subsequent nuclear translocation of one of these transcription factors, namely the nuclear factor erythroid 2related factor 2 (Nrf2), is increased in vitro upon exposure to PM [127,138,145]. In turn, Nrf2 target genes and their protein expression such as heme oxygenase 1 (HMOX1), NAD(P) H quinone dehydrogenase 1 (NQO1), glutathione S-transferases (GSTs) are upregulated [127,133,138,141,143].
Activation of the AhR induces the nuclear translocation of Nrf2 by a mechanism that needs to be elucidated, but evidence suggests it involves protein kinases that induce transcription of detoxifying enzymes, leading to a decrease of ROS levels [219].
ER stress is also related to autophagy, and PM exposure was shown to promote autophagy in vitro. Proteins involved in the initiation of autophagosome formation, such as light-chain 3B II (LC3B-II) and Beclin 1, were shown to be upregulated [123,135,168,175,224].

PM-induced senescence
Another mechanism that can be activated upon ROSinduced DNA damage is cellular senescence. Senescent cells are in irreversible arrest, thereby limiting proliferation, that is implicated in skin aging [225]. It was shown that PM 2.5 induces senescence in human keratinocytes (i.e., NHEK, HaCaT, and HEK001) [124,172,185]. PMinduced senescence was shown to be dependent on ROS formation and subsequent AhR activation [124]. The senescence inducer protein p16 INK4A was found to be upregulated upon PM 2.5 treatment, and its transcription was shown to be epigenetically regulated through promoter methylation [124]. In mice, topical PM exposure led to a hyperkeratotic epidermis. Epidermal hyperproliferation might result from the activation of the AhR, which is known to induce increased keratinocyte proliferation and differentiation [200].

Activation of the inflammatory cascade
The skin plays a major role in protecting the body from harmful environmental factors. The keratinocytes and immune cells contribute to the first and second lines of defense of the skin's immune system and are an indispensable part of the immunological barrier compartment. Additionally, the dermal fibroblasts play an important role in the sensing of pathogens, to protect the body further from harmful intrusive species. The reported findings on the effects of PM on the activation of the inflammatory cascade in skin models have been summarized ( Table 3).

Activation of toll-like receptors
Keratinocytes in the viable epidermis (i.e., SG, SS, and SB) and dermal fibroblasts defend the human body by sensing pathogens and mediating an immune response by differentiating between harmful and harmless pathogens [28]. They do so by the recognition of pathogen-associated molecular patterns (PAMPs), which are evolutionary conserved small molecular motifs within microbes, including lipopolysaccharide (LPS), peptidoglycan, flagellin and nucleic acids [234]. These PAMPs trigger responses once they are recognized by pattern recognition receptors (PRR) [235], such as members of the Toll-like receptor (TLR) family, located at the cell surface or in the cytoplasm [236]. Keratinocytes constitutively express TLR1-6 and TLR9 [237] whereas fibroblasts express all TLRs (i.e., 1-10) [238]. Their activation is critical for provoking distinct immune responses in the skin [236].  [136] The pre-conditioned 125 μg/mL, 30 m, 48 h post--Increased PGE 2 , TNF-α, IL-1β, and IL-6 protein secretion. [137]   Activated TLRs can recruit and activate the adaptor molecule, myeloid differentiation primary response 88 (MyD88), to initiate signaling and activate the nuclear factor kappa B (NF-κB) pathway and members of the mitogen-activated protein kinase (MAPK) family [237,239,240].

PM-induced activation of NF-κB
NF-κB represents a group of five inducible transcription factors that, once activated, mediate transcription of target genes by binding to a specific DNA element. Its target genes include an enormous amount of chemokines and cytokines among which tumor necrosis factor (TNF), interleukin 1 alpha (IL1A), interleukin 1 beta (IL1B) and chemokines such as C-X-C motif chemokine ligand 8 (CXCL8), have been shown to play a key role in the skin [241]. In turn, the tumor necrosis factor (TNF), interleukin 1-alpha (IL-1α), and interleukin 1-beta (IL-1β) proteins can bind their respective receptors and transactivate NF-κB. Other target genes encode adhesion molecules like intercellular adhesion molecule 1 (ICAM1) and enzymes such as cyclooxygenase 2 (COX2) and inducible nitric oxide synthase (iNOS) [241]. COX2 is an enzyme that is crucial for the formation of prostaglandin E 2 (PGE 2 ) derived from arachidonic acid from membrane phospholipids [242]. PM 2.5 was shown to be able to bind to TLR5 in keratinocytes [169]. Additionally, it was determined that TLR5 interacts with MyD88 following PM exposure, both in vivo (mice) and in vitro [169]. This, in turn, initiates the signaling cascade, and upon activation of NF-κB, the p65 subunit translocates to the nucleus, where it regulates the expression of its target genes that are involved in various processes of the inflammatory response [241]. Indeed, PM induces the phosphorylation and nuclear translation of the p65 unit [128,130,136,137,145,169,179,181,231,233]. The PM-induced activation of NF-κB leads to the increased transcription of its target genes and their protein expressions such as IL-1α, IL-1β, IL-6, IL-8, ICAM1, COX2 and TNF-α [124,128,130,133,135,138,139,142,169,173,181,227,229,230,243]. PM-induced COX2 expression leads to induced production of PGE 2 [122,126,137,143,179,181,231,232].
Activation of NF-κB also leads to the transcription of the NLR family pyrin domain containing 3 (NLRP3) gene, which is a crucial priming signal for the activation of the inflammasome [241]. The inflammasome is a large multi-protein, and its assembly leads to the activation of caspase-1, which in turn results in the cleavage of pro-IL-1β and pro-IL-18 that are stored in keratinocytes into biologically active IL-1β and IL-18, respectively [244][245][246]. A subsequent release enables adjacent epithelial cells to amplify this signal by stimulating the production of IL-1α, TNF-α, and IL-6. PM-induced activation of the inflammasome in the skin has not yet been studied; however in the pulmonary [247] and cardiovascular [248] systems, it was shown that PM activates the NLPR3 inflammasome in vivo (e.g., in mice).
Secretion of these chemokines and cytokines results in the regulation of an immune response by recruiting and activating different immune cell types into the skin, such as memory and effector T cells, and Langerhans cell precursors into the dermis and epidermis [249][250][251]. In vivo, the activation of the inflammatory cascade was observed through activation of NF-κB signaling with a resulting increased expression of pro-inflammatory cytokines upon topical exposure to PM [121,122,169]. Additionally, an increase in epidermal thickness (i.e., an indicator for activation of the inflammatory cascade) and neutrophil infiltration was observed [121,168,179,226]. In animal models with a disrupted skin barrier, topical PM application resulted in an upregulated expression of the functional homolog of IL-8, dermal cell infiltration, and increased epidermal thickness [121]. This indicates that PM can aggravate symptoms from skin diseases with an already existing disrupted skin barrier like AE, supporting the epidemiological evidence that airborne PM can aggravate AE symptoms. Moreover, in AE mice models, topical application with the soluble phase of diesel PM (e.g., PAHs), resulted in increased lesion formation and increased immunoglobulin E (IgE) levels [226].

PM induces activation of MAPK proteins
A different adaptor molecule, called TIR-domaincontaining adapter-inducing interferon-β (TRIF), can be recruited by TLRs (e.g., TLR 3 and 4) and, in addition to MyD88, can initiate signaling of both NF-κB and MAPK [240]. This activation of downstream signaling pathways results in the activation of MAPK members, such as extracellular-signal-regulated kinase (ERK), c-Jun-NH2-terminal kinase (JNK), p38, but also the transcription factor adaptor protein 1 (AP-1) [252]. Exposure of fibroblasts and keratinocytes to PM was shown to induce the activation of the MAPK pathway by the phosphorylation of ERK, JNK, and p38 [130,136,143,168,172,178,179,181,184].
A crosstalk between the previously described AhR and the MAPK pathway has been reported [253]. The protooncogene tyrosine-protein kinase (c-Src), which is part of the AhR complex, is activated and released upon the binding of the AhR to its ligand [253]. The soluble c-Src can in turn bind the epidermal growth factor receptor (EGFR) and activate the MAPK pathway [253].
MAPK activation and the resulting activation of AP-1 leads to transcriptional regulation of matrix metalloproteinases (MMPs). The major sources of MMPs in the skin are keratinocytes and fibroblasts [254], and they are responsible for remodeling of the dermis by the controlled degradation of the extracellular matrix (i.e., fragmentation of collagen fibrils) [255]. As a result, higher MMP expression and activity leads to accelerated skin aging [256]. Increased gene and protein levels of several matrix metalloproteinases (MMPs) were determined upon PM exposure in vivo and in vitro [119, 121, 129, 132, 133, 135, 137, 138, 141-143, 172, 173, 178, 185, 227].
Working model of the main affected pathways upon PM exposure to skin It was shown in vitro and in vivo that PM-induced skin barrier dysfunction, oxidative stress, and inflammation are interconnected and exaggerate each other (see the working model in Fig. 2).

Protective solutions against PM-induced skin damage
Understanding the underlying mechanisms of PM's adverse effects on human skin is crucial for the development of novel protective dermato-cosmetic technologies. To date, whereas only few technologies were developed to specifically target cutaneous damages induced by air pollutants in general, protection benefits against PM-induced skin damages were found for well-known cosmetic ingredients. Most of them are antioxidant based and aim to counteract the oxidative stress induced by PM and prevent the activation of the linked pro-inflammatory response. However, in most cases, the exact mechanism of action of these ingredients is yet to be elucidated.
Several active compounds were found to protect skin against PM-induced damage by inhibiting the expression of AhR. For example, N-acetylcysteine (NAC), was shown to suppress the expression of AhR and its nuclear translocation in human keratinocytes and attenuated the increase of intracellular ROS levels upon PM-treatment [124]. In addition, topical NAC application in mice, showed to protect against ROS-AhR dependent PM-damage in the skin, by protecting from a PM-induced hyperkeratotic epidermis [124]. In another study, the inhibition of the AhR with benzylidene dimethoxydimethylindanone in PM-treated keratinocytes and fibroblasts, resulted in decreased transcription of one of its target genes CYP1A1 and in a decreased subsequent pro-inflammatory response by a decrease in MMP-1 protein expression [172]. Camellia japonica flower extract was shown to have antioxidant properties in human fibroblasts by decreasing PM-induced intracellular ROS levels and subsequently inhibiting AhR activity and CYP1A1 transcription [119]. In addition, this extract has shown to protect from PM-induced lipid peroxidation in an ex vivo human skin model [119].
The potent antioxidant vitamin E was shown to rescue PM-induced damage in keratinocytes by partially restoring the expression of proteins that are important for proliferation, differentiation, and desmosomal integrity, among others [127]. Resveratrol, another strong antioxidant, was shown to repress the PM-induced proinflammatory response in primary keratinocytes [257].
Alginate extracted from Sargassum horneri was shown to have metal ion chelating properties by decreasing the concentration of PM metal traces (i.e., Pb, Ca, Sr, Ba, and Mg) in keratinocytes in a dose-dependent manner [231]. This led to a decrease in intracellular ROS levels and downstream inactivation of the NF-κB and MAPK signaling pathways [231].
Ethanol extract of Cornus officinalis fruit (EECF) [183], a ROS scavenger, showed an antioxidant potential in HaCaT cells, by protecting against PM-induced DNA damage, lipid peroxidation, and protein carbonylation. It also prevented increases in cellular calcium levels and inhibited apoptosis [183]. A pre-treatment with Astragali Radix or its main compound formononetin resulted in the protection against PM-induced decrease in keratinocyte proliferation and differentiation markers and blocked PMinduced apoptosis in a 2D and 3D skin model [125]. Green tea extract has shown antioxidant and anti-inflammatory properties in keratinocytes [134]. Additionally, it was shown to restore the PM-induced unbalance in cholesterol metabolism in a 3D HSE model [134]. Moreover, the major polyphenolic antioxidant compound of green tea, epigallocatechin-3-gallate (EGCG), has shown ROS scavenging properties by decreasing PM-induced ROS levels in fibroblasts [136]. In turn, this resulted in restoring elastase and collagenase activity and the expression level of several MMPs. Treatment with EGCG blocked the nuclear translocation of p65 as well as the phosphorylations of several MAPKs in a dose-dependent manner [136]. A slight decrease of PM-induced ROS by EGCG in keratinocytes was shown to result in the balance restoration of TNF-α, IL-1β, IL-6, IL-8, and MMP-1 mRNA and protein levels [173].
Although most of the studies were carried out using an active ingredient only, protective effects against PM were demonstrated also from finished formulations. For example, a novel water-in-oil emulsion with a lecithin- ROS activates the nuclear translocation of nuclear factor erythroid 2-related factor 2 (Nrf2) to propagate oxidative stress, by inducing the gene transcription of glutathione S-transferase (GST), heme oxygenase 1 (HMOX1), and NAD(P) H quinone dehydrogenase 1 (NQO1). ROS can cause damage to the skin by lipid peroxidation, protein carbonylation, and can cause irreversible cellular impairment through DNA damage. These damages, together with mitochondrial dysfunction, can lead to apoptosis. PM can activate the Toll-like receptor (TLR), leading to activation of the mitogen-activated protein kinase (MAPK) pathway and the nuclear factor kappa B (NF-κB) pathway. This, in turn, leads to an upregulation of gene expression of cytokines such as tumor necrosis factor (TNF), interleukin 1 alpha (IL1A), interleukin 1 beta (IL1B), as well as, chemokines such as C-X-C motif chemokine ligand 8 (CXCL8), adhesion molecules such as intercellular adhesion molecule 1 (ICAM1), enzymes such as cyclooxygenase 2 (COX2) and inducible nitric oxide synthase (iNOS), and matrix metalloproteases (MMPs).  [247] modified bentonite, applied topically on a HEE 3D model, prevented skin damage from urban dust and cedar pollen, as indicated by the decrease in MMP-1 and IL-8 protein secretion [129].

Future directions
2D skin models lack the barrier properties that 3D skin models have, and PM treatment can result in an overestimation of the real effect. Since the greater part of PM research on skin has been done using 2D models, it is interesting though challenging to translate the results into 3D models and even in vivo outcomes. In a recent study, the irritation potency of several compounds, has been compared in both 2D and 3D models [260]. By screening 451 compounds in 2D models, they were able to select 46 compounds that showed cytotoxicity. From the 46 compounds, only seven compounds showed a cytotoxic potential in a HEE model and only one compound in a HSE model. This result underlines that 2D usually gives an overestimation of the assessed effect compared to 3D skin models. However, it can be used as a tool to gain preliminary knowledge on an expected response towards cytotoxicity, for example. The use of 3D skin models, such as HEE and HSE models, as an alternative to animal testing is recommended when testing the cutaneous effects of PM on skin. However, one must keep in mind that 3D skin models possess weaker barrier properties compared to the native skin. More advanced and relevant 3D skin models are developed that include immune cells, melanocytes, sebocytes, and endothelial cells, stimuli for lipid synthesis [261], and cultivation conditions closer to the real-life situation [262]; hence a complete immune system [263], vascularization [264], and barrier properties similar to human skin are the main elements that current models are lacking [265]. Skin surface lipids (e.g., sebum) were not considered to date in 3D skin models utilized for PMtesting. As aforementioned, the skin surface lipids are prone to be oxidized by PAH-species adsorbed on PM, and their oxidation byproducts were shown to affect the skin. Therefore, it could be of high relevance to consider artificial sebum with a relevant lipid composition in 3D skin models to further understand the detrimental effects of PM on the skin [266,267]. Moreover, testing of diseased skin models, such as AE 3D skin models, could offer more understanding of the underlying mechanisms of symptom aggravation upon exposure to PM [265,268,269]. For the assessment of PM effects on skin aging, advanced skin models for skin aging research can be employed [270].
When using 3D skin models, it is recommended to apply PM topically, that is a closer to real-life condition compared to systemic treatment. Additionally, the chemical interactions of PM with the skin and the PM properties upon interaction with the skin should be further investigated to perform exposure experiments that have a higher physiological relevance. It is important to study the correlation between PM source and composition on the effects that it has on the skin.
Most of the PM is coming from reference standards that can be either outdated (i.e., collected in 1976) or coming from a certain geographical region, leading to a wrong generalization of the current state of airborne PM. An example is testing of diesel particles: due to the continuously improving filtering systems of diesel cars, the emitted particles for the modern filter-equipped diesel cars are producing far less PM compared to gasoline cars [271]. Although airborne PM is decreasing in the developed world, due to cars being equipped with improved filtering systems, the air quality in developing countries is a lot worse [272], due to among other things, the lack of sufficient funds for these new filtering technologies. PM collected from different cities in a broader selection of the world, would give a better understanding of the real effects of PM on the skin.
PM is only one of the major hazardous elements of air pollution, and other elements, such as ozone and UV radiation, are important to investigate as well. Combined exposures of skin models, including several pollutants, would allow for a more relevant exposure scenario and give more insight into the interactions between the pollutants and the skin; hence synergistic damage of these pollutants is suggested [273,274].
Taken together, these future directions could contribute to create recommendations for regulations to reduce airborne PM and for the dermato-cosmetic industry to design novel solutions for improved skin protection against air pollution.

Conclusions
The effects of airborne PM on skin have been intensively studied, but the majority is done in 2D skin models, especially in HaCaT cells and primary keratinocytes. Those cells are exposed to dispersed PM in cell culture media and thus reflect the real-life situation to a lesser extent, where the outer skin layer is consisting of the SC and exposed to air.
The results summarized do suggest not to limit our investigations to the assessment of oxidative stress and inflammation through ROS production and proinflammatory protein expression and secretion, respectively, but also to include implications in the complete mitochondrial respiratory chain, skin integrity, skin barrier function, epidermal differentiation and proliferation to the assessment.
Airborne PM has shown to affect several distinct cellular processes to a high degree, making it a very intriguing subject to study. Investigating these effects on a model that better resembles the complexity of human skin, a HSE or HEE model, or more advanced 3D skin models, will further reveal the involved cellular processes and effects on the health of human skin. By targeting these processes in both healthy and diseased skin, skin damage could be prevented and possibly cured by providing new solutions for the development of skincare products.